Sump Pumps
Champion Pumps
PUMPS
- SUMP
- EFFLUENT
- SEWAGE
- NON-CLOG
- GRINDER
- UTILITY
- BATIERY BACK-UP
BASINS
- FIBERGLASS
- POLYETHYLENE
- STRUCTURAL FOAM
PACKAGED LIFT STATIONS
- SIMPLEX
- DUPLEX
- SPECIALTY
ACCESSORIES
- CONTROL PANELS
- FLOAT SWITCHES
- HIGH WATER ALARMS
- LIFT OUT SYSTEMS
- FLOAT BRACKETS
- SS CHAIN
CPS3 SERIES
Rugged, heavy duty, cast iron sump / effluent pumps designed for basement sumps, light effluent and water transfer
PERFORMANCE & FEATURES
- 1/3 HP submersible pumps, built for reliability, that handle up to 1/4" solids and have a 1 1/2" discharge
- Heads up to 20' TOH and flow up to 42 GPM
- High efficient, oil filled, permanent split capacitor motor with upper and lower ball bearings and thermal overload protection
- Fasteners, handle, bracket and shaft made from rugged, corrosion resistant stainless steel
- Non-clog style vortex impeller reduces clogging by foreign materials
- Sealed entry, quick-disconnect power cords available in lengths up to 100'
- Rugged, mechanical seal, backed up by a spring loaded lip seal
- Pump dimensions : 8.7"H x 7.06"W x 9.46"D
- Pump can be operated manually and supplied with other piggy back float switches
CPS5 SERIES
Rugged, heavy duty, cast iron sump / effluent pumps designed for basement sumps, light effluent ·and water transfer
PERFORMANCE & FEATURES
- 1/2 HP submersible pumps that handle up to 1 1/4" solids and have a 2" discharge
- Heads up to 28' TOH and flow up to 85 GPM
- High efficient, oil filled, permanent split capacitor motor with upper and lower ball bearings and thermal overload protection
- Available in 115V or 230V
- Fasteners, handle, bracket and shaft made from rugged, corrosion resistant stainless steel
- Non-clog style, cast-iron, vortex impeller reduces clogging by foreign materials
- Sealed entry, quick-disconnect power cords available in lengths up to 100'
- Type 21 inboard seal design with secondary exclusion seal. Rotating components are in the motor housing, being lubricated by the motor oil, preventing foreign matter from wrapping around the seal components
- Pump dimensions : 13.9"H x 6.46"W x 9.4"D
- Pump can be operated manually and supplied with other piggy back float switches
CPS5HT SERIES (HIGH TEMP)
Rugged, heavy duty, high temperature, cast iron sump pumps designed for boiler blow-down, condensate pits and hot water transfer
PERFORMANCE & FEATURES
- 1/2 HP submersible pumps that handle up to 3/4" solids and have a 2" discharge
- Heads up to 26' TOH and flow up to 43 GPM
- High efficient, oil filled, permanent split capacitor motor with upper and lower ball bearings and thermal overload protection
- Available in 115V or 230V
- Fasteners, handle, bracket and shaft made from rugged, corrosion resistant stainless steel
- Non-clog style, cast-iron, vortex impeller reduces clogging by foreign materials
- Sealed entry, quick-disconnect power cords available in lengths up to 100'
- Type 21 inboard seal design with secondary exclusion seal. Rotating components are in the motor housing, being lubricated by the motor oil, preventing foreign matter from wrapping around the seal components
- Designed for hot water applications up to 195°
- Pump dimensions: 11.7"H X 6.46"W X 9.4"\D
- Pump can also be operated manually
Water Commander
The “No battery”, “No electricity” High output water-powered backup sump pump.
How Does It Work?
Your house water pressure is the source of the energy needed to pump excess water out of the sump well. Once the sump well water level reaches a pre-set height, the hydraulic float switch automatically activates Water Commander™. Sump water is quickly drawn out of the well with a strong suction and is discharged to the exterior.
Water Commander™ is the most reliable backup sump pump you can buy. It runs without limit, providing you with unmatched protection against basement flooding.
You should not install Water Commander™ if you have a residential well as your water source, as the pressure will not be present during a power outage.
Advantages of Water Commander™
Water Commander™ is non-electric. It uses your home's water pressure to operate - no battery or electricity is needed. It will pump as needed during power outages or primary sump pump failure. It will also work in tandem with your electrical sump pump if necessary in an extreme downpour.
Water Commander™ is powerful. It can easily match or outpump your electric sump pump.
Water Commander™ is dependable. The pump will activate and empty your sump automatically, there is no need to be home as you would if using a generator. Even if you are gone for weeks, Water Commander™ will stay on duty and operate at full power as needed.
Water Commander™ beats battery backup sump pumps. Unlike battery backups, Water Commander™ will operate as needed for an unlimited amount of time. No maintenance is required. There is no future battery replacement needed. A battery backup will give you 7 to 8 hours run time when new, but loses power capacity consistently as time goes on, until the battery must be replaced after two to three years. Water Commander™ will run reliably without limit for many years.
Easy to Install
Water Commander™ is adaptable to the space available. Both the suction and discharge pipes can be turned multiple times if needed. Model MG 22 requires a minimum %" water supply, which the majority of homes have. If you have a 1" or larger water supply, model MG 36 can be installed in your home.
Water Commander™ has a very powerful suction and can operate equally well in any position or orientation.
We are occasionally asked if the pump need be installed in the horizontal position at ceiling height rather than closer to the floor or in a vertical orientation. Water Commander™ has a very powerful suction and can operate equally well in any position or orientation.
The diagram below shows some possible installation positions. Please contact us if you have more specific questions.
Water Commander™ Model MG 22 for 3/4'' supply
Water Commander™ model MG 22 is the standard water-powered backup sump pump for most homes.
- Minimum %" water supply
- From 40 PSI to 125 PSI house water pressure
- 11/.t" PVC suction and discharge pipes
Water Commander™ Model MG 36 for 1" supply
Water Commander™ model MG 36 is the most powerful water-powered backup sump pump available anywhere.
- Minimum 1" water supply• From 40 PSI to 125 PSI house water pressure
- From 40 PSI to 125 PSI house water pressure
- 1%" PVC suction and discharge pipes